Led processor LVP605/lvp603 Built in linsn sending cards instructions
1. Model number
The instructions are for LVP603 and LVP603S.
Instructions:LVP603/LVP603S/LVP605/LVP606 can be built in one or two sending cards. Take Linsn sending cards as example.
2. Built in one TS801( or TS802) sending cards, the output max resolution can reach1280*1024(1920*640 for TS802). Built in two TS802,the output max resolution can reach 1920*1080 by sending cards cascading.(LVP605 2048*1152)
A.Fix one sending card
1. Take down the cover, remove the box barrier chip and sending cards fixed double-screw bolt.
1、 Fix: Place LED sending card, adjust A bolt to fit in hole B on the sending card. Lock fixed bolt and use hex screw to
fix DVI connector. Then connect 4pins 5V power cable to PW1 jack on the sending card.
(二)、Fix two sending cards
2、Place the second sending card, and lock one pc M3 screw and plug 5V power cable. Then use hex screw to fix DVI connector.
3、Put two ends of 10 pin cable into RS232 jack of each sending cards. Then the RS232 data can be cascaded.
Make sure one DIP switch on the sending card is off (name card1). And the other card DIP switch is on (name card2).
Then four cables of two sending cards can reach max resolution 1920*1080.
4、outside connecting way
一、
|